Product introduction
This product is used for 1000Mbps computer Ethernet electrical signal transformed into optical signals. It meet IEEE802.3z/ab、1000Base-FX、1000Base-TX standards. Suitable for use as a connector of intelligent community or optical fiber to the desktop. Break the limit of twisted-pair transmit 100m extend to 20km. Can simply achieve the interconnection among multiple servers, Repeaters, hubs, switches, and the terminal.
Product features
◆Support IEEE802.3z/ab、1000Base-FX、1000Base-TX protocol
◆Supports full duplex/half duplex mode, With automatic consultation function
◆Single-mode maximum transmission distance：20km
◆The machine produce less heat, stable and reliable in performance
◆Plug and play, do not need to set
◆Complete state of the LED indicator, convenient for network diagnosis and fault inspection
◆Automatic identification of MD1 / MD1 - X cross line and the parallel lines
◆Good flow control, with automatic reset function, can effectively prevent the system halted
◆Small casing design, unique appearance
◆Double fiber interface switches have three types for optional, they are：One fiber interface transmit end，one fiber interface receive end/Both fiber interface are receive end/ Both fiber interface are transmit end
Specification
|
Standard Protocol
|
IEEE802.3z/ab、1000Base-FX、1000Base-TX
|
|
Operating mode
|
Full duplex/half duplex，with automatic consultation function
|
|
Transmission rate
|
10M/100/1000Mbps
|
|
Transmission fiber
|
Single mode：8/125，8.3/125，9/125，10/125um
|
|
Optical wavelength
|
1310nm/1550nm
|
|
Transmission line
|
STP/UTP，Cat5e/Cat6
|
|
Power supply parameters
|
Input：AC110V-220V，50/60HZ
Output：DC5V
DC plug size：Φ5.5×2.0 Reveal：10mm
|
|
Size（L×W×H）
|
143mm×108mm×49mm
|
|
Working Temperature
|
0-65℃
|
|
Storage temperature
|
-20～80℃
|
|
Relative humidity
|
5%～90%
|
